Industry Information

Update August 09, 2022

PC/PBT/PE injection molding material characteristics and processing technology

Typical applications for PC/PBT polycarbonate and polybutylene terephthalate: gearboxes, automotive bumpers and required chemical and corrosion resistance, thermal stability, impact resistance and...

Update August 06, 2022

PA6/PA66 injection molding material characteristics and processing technology

PA6 Polyamide 6 or Nylon 6 Typical applications: Widely used in structural components due to good mechanical strength and stiffness. It has good wear resistance and is also used to make bearings....

Update August 04, 2022

PET, PP injection moulding process

PET Polyethylene terephthalate Typical applications: automotive industry, electrical components (motor housings, electrical couplings, relays, switches, microwave oven internal devices). Injection...

Update August 03, 2022

PC/ABS injection molding material characteristics and processing technology

PC/ABS Polycarbonate and Acrylonitrile Butadiene Styrene Copolymers and Mixtures: Typical Applications: Computer and Commercial Machine Housings, Electrical Equipment, Lawn Gardening Machines, Auto...

Update August 02, 2022

Characteristics and processing of PVC injection molded materials

PVC (polyvinyl chloride) Typical applications: water supply pipes, household pipes, house wall panels, commercial machine casings, electronic product packaging, medical equipment, food packaging,...

Update August 01, 2022

Defects in injection molded products - colour differences

The color difference is also called discoloration, and the gloss is poor. The mechanism of chromatic aberration: Chromatic aberration is a common defect in injection molding . There are many factors...

Update July 30, 2022

How to solve the problem of air bubbles during the injection molding process?

The solution to the bubble phenomenon in the injection molding process is as follows: 1. According to the cause of the bubble, the solution has the following aspects: (1) When the wall thickness of...

Update July 29, 2022

Problems to be aware of during injection molding of transparent plastics

Due to the high light transmittance of transparent plastics, the surface quality of plastic products must be strict, and there must be no markings, pores or whitening. Fog, black spots,...

Update July 27, 2022

Causes of product cracking during injection molding on injection molding machines

The reasons for product cracking during injection molding are as follows: Processing aspect (1) If the processing pressure is too large, the speed is too fast, the more filling, the injection and the...

Update July 26, 2022

Possible reasons for problems arising in the work of injection molding machines

1. The hydraulic oil in the fuel tank is insufficient. The suction of the oil pump or the dirt of the oil filter will cause the oil pump to be short of oil, causing the air bubbles in the oil to leak...