Causes of product cracking during injection molding on injection molding machines
The reasons for product cracking during injection molding are as follows: Processing aspect (1) If the processing pressure is too large, the speed is too fast, the more filling, the injection and the...
Possible reasons for problems arising in the work of injection molding machines
1. The hydraulic oil in the fuel tank is insufficient. The suction of the oil pump or the dirt of the oil filter will cause the oil pump to be short of oil, causing the air bubbles in the oil to leak...
Injection molding machines are prone to some faults in the work - hydraulic system
Oil temperature is too high Oil temperature abnormal rise may be caused by abnormal cooling system or high pressure of hydraulic components when working. 1. The cooling system is not normal. 1) The...
Preventive maintenance and repair work for injection molding machines mechanical part
1, template parallelism template parallelism zui can reflect the condition of the clamping part, the template is not parallel will make the product unqualified and increase the wear of equipment and...